Sample Problems > Usage > 3D_domains > 3d

{ 3D_COCKTAIL.PDE

This problem constructs a cocktail glass.

It is the geometric construction only, there are no variables or equations.

LIMITED regions are used to remove parts of the extruded shape.

Click "Controls->Domain Review" to watch the mesh construction process.

}

TITLE 'Cocktail Glass'

COORDINATES cartesian3

DEFINITIONS

rad=sqrt( x^2+ y^2)

router = 0.3 { outer radius of glass }

zglass = 0.5 { glass height }

rbase = 0.2 { radius of the base }

zbase = 0.02 { thickness of the base and cone}

rstem = 0.02 { radius of the stem }

zstem = 0.3 { height of the stem }

zslope = (zglass-zstem)/(router-rstem){ slope of conic surface }

glassangle = arctan(zslope) { slope of conic surface }

zcone = max(0,(rad-rstem)*zslope) { conic surface of the glass }

EXTRUSION

surface 'bottom' z=0

layer 'base layer'

surface 'stem1' z=zbase

layer 'stem layer'

surface 'lower' z = zstem + zcone

layer 'cone layer'

surface 'upper' z = zbase*cos(glassangle) + min(zglass, zstem + zcone)

BOUNDARIES

limited region 'outer'

layer 'cone layer' { outer region exists only in cone }

start (router,0) arc( center=0,0) angle=360

limited region 'base'

layer 'base layer' { base region exists only in base }

start(rbase,0) arc(center=0,0) angle=360

limited region 'stem'

layer 'stem layer' { stem region exists in the stem and the bottom of the cone }

layer 'cone layer'

start(rstem,0) arc(center=0,0) angle=360

PLOTS

grid(x,y,z) paintregions as "final mesh"

grid(y,z) on x=0 nolines paintregions as "Region Map"

END

3d_cocktail